Cube AustraliaCube Australia

ModelsModels DetailsDetails GalleryGallery DIYDIY FAQFAQ


Home > Details > Technical Specification

Technical Specification

Specifications

BODY 1.4L (CR14DE) 2WD 1.5L (HR15DE) 2WD Note
Cube Cubic Cube Cubic
Exterior Length (mm) 3730 3900 3730 3900
Width (mm) 1670 1670
Height (mm) 1640 +10 for e-4WD
Interior Length (mm) 1870 2360 1870 2360
Width (mm) 1340 1340
Height (mm) 1265 -15 for sunroof
Wheelbase 2430 2450 2430 2450
Track Front 1460 1470 1460 1470
Rear 1455 1465 1455 1465
Ground Clearance 140 150 +5 for e-4WD
Weight 1080 1090 1100 1110 +70 for e-4WD
Gross Weight 1355 1365 1375 1385 +70 for e-4WD
Turning radius 4.4m
Fuel consumption 16.4km/L 19.4km/L 16km/L for 1.4L e-4WD
Fuel Tank Capacity 41L 45L
Steering System Power Assisted Rack & Pinion
Suspension Front Independent Strut / Torsion Beam
Rear Independent Strut / Torsion Beam
Brakes Front Ventilated Disk
Rear Leading Trailing Drum

ENGINE CR14DE HR15DE
Type DOHC Water cooled DOHC Water cooled
Cylinders 4 4
Displacement 1386cc 1498cc
Bore x Stroke 73.0mm x 82.8mm 78.0mm x 78.4mm
Compression Ratio 9.8 10.5
Max. Power kW (PS) / rpm 72 (98) / 5600
71 (97) / 5600 for e-4WD
80 (109) / 6000
Max. Torque Nm (kgm) / rpm 137 (14.0) / 3200
136 (13.9) / 3200 e-4WD
148 (15.1) 4400

TRANSMISSION Full range electronic control 4-speed automatic (E-ATx) Xtronic CVT
(Stepless transmission)
Drive 2WD/e-4WD 2WD
Engine CR14DE CR14DE/HR15DE
Gear Ratios 1st gear 2.861 2.561~0.427
2nd gear 1.562
3rd gear 1.000
4th gear 0.697
Reverse gear 2.31 2.619
Final Drive Ratio 4.072 5.473

 

Model Blueprints

Z10 Cube (5-seater)

Z10 Blueprint

Z11 Cube (5-seater)

Z10 Blueprint

Z11 Cube Cubic (7-seater)

Z10 Blueprint

 

< Back to top >

 

If you have any additional questions, feedback or additional information to share please get in contact with us.

 

HOME | MODELS | DETAILS | GALLERY | DIY | FAQ

© 2015 Cube Australia. All rights reserved. This site is not affiliated with Nissan Motor Corporation.